Outdoor Kitchen Cabinets in Homosassa, FL

Key takeaways

If you are looking for outdoor kitchen cabinets around Homosassa, you are looking in the right place, because this is where they are made. Not designed here and built somewhere else. Welded, cut, fitted and crated in a building we own on the Florida gulf coast.

• We are the manufacturer. There is no dealer or distributor between you and the people who built your cabinet.
• We build for this weather because we work in it: salt air, hard sun, afternoon storms, humidity that never leaves.
• Straight runs at 5, 6 and 7 feet, and one L at 7 by 4. We do not build U-shapes, islands or freestanding modular pieces.
• Everything arrives assembled with the countertop already on. Set it, level it, connect the gas.
• Call 352-450-8881 and you get us, not a call centre.

Who you are actually buying from

Fire Islands is the brand. Aluminum Outdoor Kitchens LLC is the company, and we are a family business in Homosassa. We weld the frames, cut the poly, fit the appliances and crate every cabinet ourselves.

There is no sales team and no call centre, which is either the reason to buy from us or the reason not to, and we would rather you decided that having spoken to us. The phone is 352-450-8881, Monday to Friday, 8am to 4pm Eastern. We are often out on the shop floor, so leave a message and you will get a call back within one business day. Email is info@fireislands.com.

What being local actually changes

Three practical things, rather than a slogan.

The first is that when you ask how something is built, you are asking the person who built it. Not a distributor reading a spec sheet. If you want the alloy, the wall thickness or the weld detail, we know it and we will tell you.

The second is that a revision or a replacement part goes through one conversation instead of three. Every door, drawer face and end panel on our cabinets is screwed to the frame from the inside, so a damaged panel is a part rather than a repair. We ship the panel and the instructions and the swap takes about twenty minutes with a screwdriver.

The third is that we know what this climate does, because our own cabinets sit in it.

The weather we build for

Homosassa is hard on anything left outdoors. Strong sun fades lesser finishes, humidity and rain work on hardware and seams, and salt-laden air off the gulf keeps working long after the wind drops.

That shaped three decisions you can check for yourself.

The frames are welded, not bolted. Aluminum extrusion, cut to your build, squared in a jig and welded corner to corner into one rigid box. A fastener in a structural joint is a hole and a moving part, and a cabinet here runs a heat cycle every day of its life. A weld cannot loosen, because once it cools there is no joint left to loosen.

The frames ship bare. No powder coat, no paint, and the floor pans are bare too. That is deliberate and it matters more here than most places: a coating is the only thing protecting a coated frame, and coatings fail first at cut edges and drilled holes, which is exactly where salt air starts. Bare aluminum grows its own oxide skin and grows it back every time it is scratched.

The countertop is bedded on silicone. Stainless set straight onto an aluminum frame is what engineers call a galvanic couple, and salt air is the condition where that corrodes. The silicone bonds the top down and keeps the two metals from ever touching. It is worth asking any maker what sits in that joint.

Our Florida cabinet guide goes further into what this climate asks for, and the how it's built page shows the frame itself.

What we build

Straight runs at 5, 6 and 7 feet, and one L at 7 by 4. Cabinets are 28 inches deep. We do not build U-shapes, islands or freestanding modular pieces, and we would rather tell you that up front than quote you something we do not make.

• Doors and drawers. Marine-grade HDPE, coloured all the way through. King StarBoard ST in twelve solid colours, or SIMONA Polygrain in six embossed woodgrains: Onyx, Northeastern Walnut, Birch, Susquehanna Grey, Olyphant Oak and Teak. Nothing to seal, stain or refinish.
• Door styles. Royal is a flat slab, Sago is a 5mm routed frame, Foxtail is Sago with verticals running the full height of the door.
• Countertops. 16 gauge 304 stainless, powder coated grey or tan. Both included, no upcharge for either. We do not offer bare stainless, because a coated top runs cooler in our sun and does not show every mark.
• Appliances. Blaze only. Grills, side burners and the 20 inch outdoor refrigerator, a BLZ-SSRF20-4.3 at 4.3 cubic feet. Every cutout is made for the appliance you chose before the frame leaves the jig.
• Standard in every kitchen. A trash slide-out, an LP tank slide-out, soft close hinges, the Z-Box drawer system, and adjustable leveling feet with up to 1.5 inches of travel.

Our configurator prices all of it live as you choose, with no email required.

Planning your space

Measure the patio, and the route to it

Measure the usable width and depth around the proposed kitchen, including doors, screens, railings and roof supports, and check whether the slab is actually square. A few inches can change an appliance combination or turn a comfortable walkway into a squeeze.

Then measure the access path from the street or driveway, because a finished cabinet has to travel through gates, around corners and under low branches. Take photographs from several angles and mark the fixed obstacles on a rough drawing. That is enough to start a useful conversation.

Layout, and where people stand

A straight run is easy to place along a wall or patio edge. The L gives you a second working direction and separates cooking from serving. The right answer depends less on what looks impressive than on where people stand when drinks, plates and food are moving.

Sketch the steps from refrigerator to prep surface to grill, then imagine two or three guests nearby. Leave room to open appliance doors without blocking the main route to the pool or the back door.

Utilities, clearance and ventilation

Find the gas, electrical and water before fixing the cabinet position. Appliance manuals and local code set the required clearances, so leave room for connections and service access rather than filling every inch. A covered patio still needs airflow around cooking equipment.

Vents must stay clear, and cabinet storage must not be packed against them. That is a safety matter, not housekeeping: blocked ventilation lets heat or gas build up. Do not line the appliance bay with foil or board either.

Slope

Slabs around here are often poured with a fall for drainage, which is sensible and does mean checking before you order. The leveling feet give up to 1.5 inches of adjustment, which handles most patios. Past that, the pad needs correcting rather than the feet. Check level front to back and side to side after placement, and confirm the doors and drawers still run smoothly.

Delivery, and what happens on the day

Every kitchen ships fully assembled with the countertop already installed. Straight runs arrive as one piece. The L arrives in two sections that bolt together on site. Freight is free in the lower 48.

Before the truck comes, clear furniture, planters and loose gravel from the route, measure gates and turns again, and tell us about steps, slopes, soft ground or restricted truck access. The pad should be ready and positioned so doors and appliance panels can open fully.

Once the pad is ready and the gas is arranged, placing and levelling usually takes under an hour. Inspect the countertop, doors, drawers and frame before you finish, and photograph anything that looks wrong while the packaging is still there.

Gas is where a professional is required

Natural gas should be installed and inspected by a licensed plumber, following local code. LP needs qualified installation or inspection too, and qualified installation is a condition of the Blaze appliance warranty. The LP regulator connects to the grill on site: tighten it with a wrench and leak test every joint with soapy water before lighting.

If you ever smell gas, shut off the supply, ventilate the area, and stop using the equipment until a qualified technician has checked it. Do not go looking for it while cooking.

Custom work, honestly

Our standard sizes cover most patios, and when they fit, they are the better buy: simpler to price, quicker to build, easier to deliver.

When a space genuinely needs something else, an angled wall, a structural column, several elevations, or a run that has to coordinate with an existing bar or fire feature, that is a different conversation. Our custom page sets out how we handle it, including a layout guide for sketching your space and how installed work gets done. Start there rather than guessing from standard dimensions, and some projects really are easier to just talk through on the phone.

Budget

The cabinet is one line of an outdoor kitchen budget. Appliances, the countertop, freight, pad preparation and gas or electrical labour all move the total.

Ours start at $6,774 for a straight run and $8,474 for the L, complete with the powder coated countertop and free freight in the lower 48. Treat that as the product cost and budget separately for slab work, drainage changes, electrical, gas connection and any permits, plus a little contingency for whatever is hiding under the patio. Our cost guide shows how that compares with the rest of the category, and where a contractor build spends money you cannot cook on.

The warranty, in plain terms

Read the cabinet and appliance warranties as separate documents, and read the exclusions rather than the headline.

Ours: we do not cover fading, because nothing anyone sells can honestly promise a colour will never shift in Florida sun, and we would rather say so than write a sentence we cannot stand behind. What we do not do is rule out corrosion altogether, which some of the biggest names in this category do in writing. The one exception is hardware that never got maintained, and that brings us to the only job this kitchen asks of you.

The hinges and the drawer slides will corrode if they are ignored. They are metal, they live outdoors and they have moving faces. A silicone spray on each of them two or three times a year is the whole job, more often if you are close to the water. No warranty anywhere covers neglected hardware, and they are screwed-in parts, so if one does wear out we send a replacement. The full routine is in our protection guide and in the Care & Use Guide that ships with every kitchen.

Blaze appliances have their own terms and one deadline: register each appliance at blazegrills.com within 30 days of purchase and keep the receipt. Blaze covers main burners, cooking grids, body, flame tamers, warming racks and valves for life, and ignition and electronics for a year. It does not cover discolouration or surface rust.

Come and ask us something hard

The best thing about buying from the people who built it is that you can ask a question the brochure does not answer. How the frame is joined. What sits under the countertop. What happens when you scratch a door. Why the frame is bare.

We answer seven of those questions in order, including the ones that are not flattering, on our how it's built page. If you have an eighth, call 352-450-8881 or email info@fireislands.com. We would rather answer a hard question than dodge one.

Frequently asked questions

Where are Fire Islands cabinets made?

In Homosassa, on the Florida gulf coast, by Aluminum Outdoor Kitchens LLC. We weld the frames, cut the poly and crate every cabinet in a building we own.

Do you sell through dealers?

You buy direct from us, so there is no dealer or distributor between you and the people who built your cabinet. For custom projects that need installation work, our custom page explains how that is handled.

What sizes do you build?

Straight runs at 5, 6 and 7 feet, and one L at 7 by 4, all 28 inches deep. We do not build U-shapes, islands or freestanding modular pieces.

Do the cabinets arrive assembled?

Yes, with the countertop already installed. Straight runs come as one piece and the L in two sections that bolt together on site. Most setups take under an hour once the pad is ready and the gas is arranged.

Can you deliver outside Florida?

Yes. Freight is free in the lower 48, and the cabinet arrives crated and fully assembled wherever it goes.

Will the cabinets sit level on my patio?

The adjustable feet give up to 1.5 inches of adjustment, which covers most slabs poured with a drainage fall. Beyond that the pad needs correcting rather than the feet, so check with a long level before ordering.

What maintenance do they need?

Wipe the surfaces after cooking, keep the vents clear, wipe out standing water after a storm, and put a silicone spray on the hinges and drawer slides two or three times a year. That last one is the only job with consequences if you skip it.

Can I see one before I buy?

Call us. We are on the shop floor most days, and we would rather show you a bare frame than a brochure.

← All posts